Replacement Keys For the 03-11 Saab 9-3
It is important to replace your car keys as soon as possible in case you lose your keys. This could save you lots of money over the long term. Many owners of the Saab 9-3 03-11 struggle to find an authorized source for replacement keys.
Making another key for your Saab isn't as complicated as you think. You'll need a flathead as well as patience.
Replacement cases for the SAAB 9-3 key fob
Saab owners should always have at least one spare key for their cars as losing the only working key could cost a lot. While it is simpler to copy a classic car key, Saab's new keys have an immobilizer feature that only the owner is able to disable. The key is an electronic device that connects directly with the computer of the car. It contains a unique chip for each car.
It's simple to swap the case on a Saab 9-3 Key fob. There aren't saab 9-5 key replacement . All you need is a flathead screwdriver open the case. Be careful not to scratch any electronic component. Once the case has been removed, you are able to install the battery and reassemble the SAAB 9-3 keyfob.
You can purchase a new case online for your vehicle key fob, but beware of products that are advertised for this model. These items might not be compatible with the vehicle you own, as they are not SAAB-approved. They may also cause irreparable damages to the electronics of your vehicle. Search for genuine Saab replacement parts from reputable suppliers. This will ensure that your replacement part is of highest quality. The best way to go is to find an experienced locksmith local to you in Saab.
Remove the emergency key from your SAAB 9-3 keyfob
The 03-11 SAAB 9-3 was a stunning car, and lots of them can still be seen around the globe. Key fobs are the most frequent issue with this model. It tends to wear easily. There is an easy and cheap solution to this issue. Simply replace the case of your SAAB 9-3 key fob and it will be as new!
The SAAB 9-3 key fob can be described as a small remote control for your vehicle that comes with the manual key to unlock the doors and also starting the engine. It is simple to copy this key. However, it is more difficult to copy the electronic part. The electronic components of these keys are protected with a special chip, which stops anyone from copying them without the Tech-2 tool, which is approved by Saab.
Adding a second key to a Saab is possible through an agent, but it will cost you hundreds of dollars. This is due to the addition of a new CIM module and a brand new key with an electronic. However, you can save money by eliminating the emergency key from the SAAB 9-3 key fob, and then reprogramming it. To do this, simply insert an flathead screwdriver into the slot that is located in the middle of the case and gently pull it open.
How do you change the batteries in a SAAB 9-3 keyfob
It can be extremely frustrating to lose keys to your car or get them stolen. It can also be expensive when you visit the dealer to buy a new key. If you have a spare, AutoLocks LTD will provide you with a replacement key for 65percent less than the dealer's price.
It is easy to change the battery in the SAAB 9-3 keyfob. First, you need to remove the emergency key. Press the blue button on your key fob to do this. You can then remove the emergency key by pressing the blue button on the key fob. Be careful not to spray the emergency key with liquids. This could damage the electronic components within it.
The next step is to take off the plastic cover that is on the back of the key fob. You can do this using the aid of a screwdriver. Once you have removed the cover and the cover is open, you can access the case to replace the battery. Make use of a screwdriver with a flat head to avoid damaging the plastic.
It is a good thing to add a second one if you only have one that works. This will save you money in the long run. It is cheaper than replacing the key fob, and you don't need to worry about getting it programmed at the dealer.
Replacing the SAAB 9-3 key fob
In the case of Saab 9-3 cars that have only one key it's best to acquire an additional key as fast as you can. The process of adding a new key isn't expensive, but it is far less expensive than replacing the entire vehicle. To make a new key, you'll need to utilize a tool that is specialized, known as the Tech2. A new CIM module is required, along with the ignition. A new key has to be the only one programmed to the car, and it can't be used to access another vehicle.
To replace a Saab 9-3 fob, the owner must call a dealer service department and set up an appointment to replace the only car key. The technician will need the unique code for the new key. They could also require replacement of the CIM or TWICE module. Dealers must reprogram the ignition cylinders in order to accept the new keys.
It is simple to replace the battery in your Saab 9-3 keyfob. Take out the emergency key using an phillips screwdriver with a flat head. Then, put the screwdriver into a slot that is located in the middle of the Fob and slowly move it around. After a few minutes the case will split and you will be capable of accessing the battery. It's important to note that you should not pour liquids onto the Fob, since this can harm the electronic components within.